6 Axis H Beam CNC Cutter Plasma Cutting Coping Machine

Short Description:

Model No.: T300

Introduction: H beam , channel steel , angle steel plasma cutting machine , with 6 axis cutting beam and Japan Fuji servo motor and driver , Good quality and 3 years warranty .

Send email to us

Product Detail

Product Tags

Features

Unlike the machine where the workpiece rotates, it needs to find the center. This machine can automatically find the center without manually finding the center. The workpiece is lifted up and the cylinder is automatically pushed to start cutting.

Using library programming, the cutting path can be generated by inputting the size and the distance relative to the processing starting point according to the graphics in the library, without any programming and drawing foundation, any smart young man can master the operation mode in just a few hours.

LIBRARY INTRODUCTION

1. Support four types of section steel

2.Basic graphics

The graphics in this catalog can be entered in size and coordinates on the system interface, so that they can be cut at any position on any surface of the above four cross-sections

3. Dedicated graphics

It is used to cut a certain type of steel, such as truncation, intersecting line locks, etc. The following graphics can be cut by entering the size and relative position on the interface.

H-beam part:

Techinical Parameters

Model	T300
Plasma Power	200A
Cutting Diameter	800*400mm
Cutting Length	6m / 12m
Driver	Japan Fuji Servo Motor
Moving Type	6 Axis
System	Shanghai Fangling
Beveling	Yes